K33100
2019-09-25 15:51:52 Origin： Remark：0 Click：
Round bars K33100 Inventory, Stock list K33100 Flat bars, Shaft K33100 Steel coil property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A182 - 2018.
TECHNICAL DATA SHEET - Grade UNS K33100
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 8.0Cr- 20.0Ni Alloy steel
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.10 ~ 0.20
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.10 ~ 0.20
Mn (％): 0.50 ~ 0.80
Si (％): 1.00 ~ 1.40
Si (％): 1.00 ~ 1.40
P (％)≤: 0.040
S (％)≤: 0.030
Cr (%): 7.00 ~ 9.00
Mo (%): 19.0 ~ 22.0
S (％)≤: 0.030
Cr (%): 7.00 ~ 9.00
Mo (%): 19.0 ~ 22.0
Ni (%): -
Nb (%): -
Ti (%): -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 550
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: Solution annealed 1040 Deg. C
Cooling medium: water or oil cool
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W200 ~ 1200mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W200 ~ 1200mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccsteels.com.) our resident team of qualified production engineers.
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccsteels.com.) our resident team of qualified production engineers.
Hot search：K33100
Previous page：ASTM A182 Grade F10
Last page：STS316L
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B