K91061
2019-10-30 10:41:57 Origin： Remark：0 Click：
Description K91061 Forgings, Inventory K91061 Sheet, Ex-stock K91061 Round bar properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A182 - 2018.
TECHNICAL DATA SHEET - Grade UNS K91061
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 9Cr - 1W - 1Mo - 0.20V Alloy steel
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.09 ~ 0.13
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.09 ~ 0.13
Mn (％): 0.30 ~ 0.60
Si (％): 0.10 ~ 0.50
Si (％): 0.10 ~ 0.50
P (％)≤: 0.020
S (％)≤: 0.010
Cr (%): 8.50 ~ 9.50
Mo (%): 0.90 ~ 1.10
S (％)≤: 0.010
Cr (%): 8.50 ~ 9.50
Mo (%): 0.90 ~ 1.10
Ni (%): ≤ 0.40
Nb (%): 0.06 ~ 0.10
N (%): 0.04 ~ 0.09
V (%): 0.18 ~ 0.25
W (%): 0.90 ~ 1.10
B (%): 0.0003 ~ 0.006
Al (%): ≤ 0.020
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 620
Yield strength, σ0.2/MPa: 440
Elongation, δ ≥(％): 18.0
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: 248 Max.
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: 248 Max.
HEAT TREATMENT PRACTICE
Condition: Solution annealed 1040 ~ 1080 Deg. C
Cooling medium: air cool
Tempering temperature: 740 ~ 780 Deg. C
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 650mm
Square bar / Flat bar: 3mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W20 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 650mm
Square bar / Flat bar: 3mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W20 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical inquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：K91061
Previous page：STS430
Last page：ASTM A182 type F11 Class 1
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B