32NCD12
2019-12-20 14:38:56 Origin： Remark：0 Click：
32NCD12 Specifications,32NCD12 Datasheet,32NCD12 Forging Bar plate machined,32NCD12 Steel exporters. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
TECHNICAL DATA SHEET - NF 32NCD12
MATERIAL CATEGORY: High-tensile alloy structural steel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.27 ~ 0.36
MATERIAL CATEGORY: High-tensile alloy structural steel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.27 ~ 0.36
Si (%): 0.15 ~ 0.40
Mn (％): 0.25 ~ 0.65
Mn (％): 0.25 ~ 0.65
P (％)≤: 0.025
S (％)≤: 0.025
Cr (%): 0.90 ~ 1.50
Mo (%): 0.25 ~ 0.40
Ni (%): 2.25 ~ 3.50
TYPICAL MECHANICAL PROPERTY
Treatment condition: Quenched + Tempered
Tensile strength, σb/≥ MPa: 930 ~ 1130
Yield strength, σ0.2/≥ MPa: 735
Elongation, δ ≥(％): 13.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: 335
Yield strength, σ0.2/≥ MPa: 735
Elongation, δ ≥(％): 13.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: 335
Hardness after soft annealing: HBW255 Max.
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process EF - EAF+ VD, BEF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
PRODUCT PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 ~ 4000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM requirement.
The steels shall be manufactured by melting process EF - EAF+ VD, BEF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
PRODUCT PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 ~ 4000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：32NCD12
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B