K23280
2019-12-31 10:13:56 Origin： Remark：0 Click：
Specifications K23280 Datasheet, Inventory K23280 Chemical, Stocklist K23280 Properties K23280 Bar machined, Exporters from Melting, ESR & VAR technique, Blooming, Hot forging,Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL DATA SHEET - UNS K23280
MATERIAL TYPE - Cr-Ni-Mo Alloy steel
MELTING PROCESS - Consumable electrode remelted steel
TECHNICAL SPECIFICATION - SAE AMS 6497A
MELTING PROCESS - Consumable electrode remelted steel
TECHNICAL SPECIFICATION - SAE AMS 6497A
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): 0.29 ~ 0.36
Si (％): ≤ 0.30
Mn (％): 0.70 ~ 1.20
C (％): 0.29 ~ 0.36
Si (％): ≤ 0.30
Mn (％): 0.70 ~ 1.20
P (％)≤: 0.015
S (％)≤: 0.005
Cr (%): 1.10 ~ 1.60
Mo (%): 0.90 ~ 1.40
S (％)≤: 0.005
Cr (%): 1.10 ~ 1.60
Mo (%): 0.90 ~ 1.40
Ni (%): 0.50 ~ 1.00
V (%): 0.20 ~ 0.40
Al (%): 0.10 ~ 0.30
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1080 ~ 1250
Yield strength, σ0.2/MPa: 900
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF / VIM followed by electroslag refining (ESR / VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W70 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by EAF / BEF / VIM followed by electroslag refining (ESR / VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W70 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：K23280
Previous page：32CrMoNiV5
Last page：S151D
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B