K22035
2020-01-07 09:09:57 Origin： Remark：0 Click：
K22035 Steels Wholesalers, K22035 Alloy Suppliers & Manufacturers,K22035 Forging Bar & Plate machined,K22035 Alloy Exporters Ex-stock sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - Alloy K22035
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 0.20C - 1.85Ni - 1.0Cu Alloy steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15~ 0.25
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15~ 0.25
Mn (％): 0.40 ~ 1.05
Si (％): 0.15 ~ 0.45
Si (％): 0.15 ~ 0.45
P (％)≤: 0.035
S (％)≤: 0.010
Cr (%): -
Mo (%): -
S (％)≤: 0.010
Cr (%): -
Mo (%): -
Ni (%): 1.60 ~ 2.25
Nb (%): -
Ti (%): -
Cu (%): 0.75 ~ 1.25
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 435
Yield strength, σ0.2/MPa: 315
Elongation, δ ≥(％): 25.0
Reduction of area, ф ≥ (％): 38.0
Hardness via heat treatment /HBW: 197 max.
Reduction of area, ф ≥ (％): 38.0
Hardness via heat treatment /HBW: 197 max.
HEAT TREATMENT PRACTICE
Condition: annealed 955 Deg. C
Cooling medium: furnace cool
Tempering temperature: -
Condition: normalize and tempered 955 Deg. C
Cooling medium: air cool
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by Electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 550mm
Square bar / Flat bar: 10mm to 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by Electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 550mm
Square bar / Flat bar: 10mm to 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccstels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccstels.com) our resident team of qualified production engineers.
Hot search：K22035
Previous page：A182 Grade FR
Last page：1.6747
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B