A182 Grade F36
2020-01-13 09:42:40 Origin： Remark：0 Click：
Material Specifications ASTM A182 Grade F36 Round bar, Flat bar, Plate A182 Grade F36 Alloy Suppliers & Manufacturers, Grade F36 Forging Bar & Plate Machined
TECHNICAL DATA SHEET - ASTM A182 Grade F36
TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 1.2Ni - 0.35Mo - 0.60Cu Alloy steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.10 ~ 0.17
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.10 ~ 0.17
Manganese, Mn (％): 0.80 ~ 1.20
Silicon, Si (％): 0.25 ~ 0.50
Silicon, Si (％): 0.25 ~ 0.50
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.015
Chromium, Cr (%): 0.20 ~ 0.40
Molybdenum, Mo (%): 0.25 ~ 0.50
Sulfur, S (％) ≤: 0.015
Chromium, Cr (%): 0.20 ~ 0.40
Molybdenum, Mo (%): 0.25 ~ 0.50
Nickel, Ni (%): 1.00 ~ 1.30
Niobium, Nb (%): 0.015 ~ 0.045
Titanium, Ti (%): -
Copper, Cu (%): 0.50 ~ 0.80
Nitrogen, N (%): ≤ 0.020
Aluminum, Al (%): ≤ 0.050
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 620
Yield strength, σ0.2/MPa: 440
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 252 max.
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 252 max.
HEAT TREATMENT PRACTICE
Condition: normalize and tempered 900 Deg. C
Cooling medium: air cool
Tempering temperature: 595 Deg. C
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, and other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccstels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccstels.com) our resident team of qualified production engineers.
Previous page：Alloy 718
Last page：X12CrMoWVNbN10-1-1
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B