15CrMoV6
2020-04-08 09:31:47 Origin： Remark：0 Click：
AIR9160C 15CrMoV6 is a low carbon 1.4% Chromium - 0.9% Molybdenum - Vanadium Steel, 15CrMoV Round bar, flat bar, Heat treatment.
TECHNICAL SPECIFICATION - Grade AIR 9160C Grade 15CrMoV6
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS
MATERIAL CATEGORY - alloy structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.12 ~ 0.18
Silicon, Si (％): ≤ 0.20
Manganese, Mn (％): 0.80 ~ 1.10
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.015
Chromium, Cr (%): 1.25 ~ 1.50
Molybdenum, Mo (%): 0.80 ~ 1.00
Vanadium, V (%): 0.20 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 980 ~ 1180
Yield strength, σ0.2/≥ MPa: 780
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 290 ~ 350
Quenching, 975,+/-10 Deg. tempering 625, +/-5 Deg
AVAILABLE DIMENSIONS AND SHAPES
Round bar (diameter): 5.5 mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Steel strip: T0.20 ~ 3mm X W10 ~ 800mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS
MATERIAL CATEGORY - alloy structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.12 ~ 0.18
Silicon, Si (％): ≤ 0.20
Manganese, Mn (％): 0.80 ~ 1.10
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.015
Chromium, Cr (%): 1.25 ~ 1.50
Molybdenum, Mo (%): 0.80 ~ 1.00
Vanadium, V (%): 0.20 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 980 ~ 1180
Yield strength, σ0.2/≥ MPa: 780
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 290 ~ 350
Quenching, 975,+/-10 Deg. tempering 625, +/-5 Deg
AVAILABLE DIMENSIONS AND SHAPES
Round bar (diameter): 5.5 mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Steel strip: T0.20 ~ 3mm X W10 ~ 800mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Hot search：15CrMoV6
Previous page：Invar 36
Last page：ASTM A182 type F6NM
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B