65S2VA
2019-06-11 10:45:00 Origin： Remark：0 Click：
Specifications 65S2VA Ex-stock, 65S2VA Forge bar, Datasheet 65S2VA exporter, from Melting, ESR & VAR technique, hot blooming, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test.
MATERIAL TECHNICAL DATA SHEET - Grade 65S2VA
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.61 ~ 0.69
Si (％): 1.50 ~ 2.00
Mn (％): 0.70 ~ 1.00
C (％): 0.61 ~ 0.69
Si (％): 1.50 ~ 2.00
Mn (％): 0.70 ~ 1.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): ≤ 0.30
Ni (%): ≤ 0.25
S (％)≤: 0.015
Cr (%): ≤ 0.30
Ni (%): ≤ 0.25
W (%): 0.80 ~ 1.20
Cu (%): ≤ 0.25
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: -
Yield strength, σ0.2/MPa: -
Elongation, δ ≥(％): -
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 279
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 279
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR or VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T15 - 400mm X W20 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR or VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T15 - 400mm X W20 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：65S2VA
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B