1.6545
2020-07-02 15:58:14 Origin： Remark：0 Click：
Description 1.6545 Chemical, 1.6545 Ex-stock, 1.6545 Flat bars Plate machined, DIN 1.6545 alloy exporters from Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL SPECIFICATIONS - DIN 1.6545
MATERIAL FORM: Bar, Plate, Strip
MATERIAL TYPE: Cr-Ni-Mo Structural steel
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.28 ~ 0.33
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.28 ~ 0.33
Mn (%): 0.40 ~ 0.90
Si (%): 0.15 ~ 0.35
P (%))≤: 0.025
S (%))≤: 0.015
Cr (％): 0.40 ~ 0.60
Ni (％): 0.40 ~ 0.70
Cr (％): 0.40 ~ 0.60
Ni (％): 0.40 ~ 0.70
Mo (％): 0.15 ~ 0.25
Others (％): Al ≤ 0.15
Others (％): Al ≤ 0.15
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥MPa: 930
Yield strength, σ0.2/≥MPa: 650
Elongation, δ (％)≥: 10.0
Reduction of area, ф (％)≥: -
Elongation, δ (％)≥: 10.0
Reduction of area, ф (％)≥: -
Anneal hardness ≤(HBW): 241
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 0.10mm to 300mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 6000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by EAF / CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 0.10mm to 300mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 6000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
MAIN STEEL GRADE FOR EXPORT MARKET
ASTM A565 Grade 616/422/S42200, Grade 615/S41800, XM-32/S64152, PH13-8/XM-13/s13800
17-4PH/630/1.4542, 631, 851, 961, WB36, D6-AC, D6A. A-286/660
1.4980, 1.4922, 1.4923, 1.4935, 1.4938, 1.4913, 1.4122
Forms: Bars, Forge piece, Ring, Strip
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer. E-mail: sales@ccsteels.com.
Hot search：1.6545
Previous page：30NiCrMo2-2
Last page：XM-18
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B