16NCD13
2024-11-02 02:59:00 Origin： Remark：0 Click：
Description 16NCD13 Round bars Inventory Equivalents, 16NiCrMo13 Forgings Shaft Steelmaking, ESR melted, Hot forging/rolling, Heat treated and machined.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATASHEET - 16NCD13
MATERIAL TYPE - Bearing steel
MATERIAL STANDARDS - NF A35-565
STOCK LIST & INVENTORY ON HAND - Rournd bar dia. 80 ~ 170mm
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.12 ~ 0.17
Silicon, Si (％): 0.15 ~ 0.35
Silicon, Si (％): 0.15 ~ 0.35
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015
Chromium, Cr (%): 0.90 ~ 1.15
Molybdenum, Mo (%): 0.15 ~ 0.30
Nickel, Ni (%): 3.00 ~ 3.50
Others (％): Copper, Cu ≤ 0.30, Aluminum, Al ≤ 0.050
Others (％): Copper, Cu ≤ 0.30, Aluminum, Al ≤ 0.050
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 1030~1330
Yield strength σs≥/MPa: -
Elongation δ5 ≥(%): 10.0
Yield strength σs≥/MPa: -
Elongation δ5 ≥(%): 10.0
Reduction of area ψ(％) ≥: -
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF + VD /LF + IFF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - QT.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shafts.
PROFILE AND DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：16NCD13
Previous page：1.3532
Last page：ASTM A182 Gr.S30909
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B