EN100
2024-11-22 06:52:00 Origin： Remark：0 Click：
Technical data sheet EN100 Round bar, Flat bar, Plate, Chemical EN100 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treated
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - EN100
MATERIAL CATEGORY - Aircraft "S" series alloy structural steel
TYPE OF STEEL - 850MPa low alloy steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.35 ~ 0.45
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 1.20 ~ 1.50
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 0.30 ~ 0.60
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 1.20 ~ 1.50
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 0.30 ~ 0.60
Nickel, Ni (%): 0.50 ~ 1.00
Molybdenum, Mo (％): 0.15 ~ 0.25
Molybdenum, Mo (％): 0.15 ~ 0.25
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength, σb ≥ MPa: 980
Yield strength, σs ≥ MPa: 835
Elongation, δ5≥ (%): 12.0
Yield strength, σs ≥ MPa: 835
Elongation, δ5≥ (%): 12.0
Impact, AKV≥/J: -
Hardness HBS: -
Hardness HBS: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft, Pressure vessel.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 5.5mm to 500mm
Square bar / Flat bar: 6mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 5.5mm to 500mm
Square bar / Flat bar: 6mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail:sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail:sales@ccsteels.com.
Hot search：EN100
Total list
Monthly rank
- 5438NCD4
- 5342Cr4Mo2
- 5238B3
- 4719CrNi5
- 4524CrMo5
- 3926NiCrMoV11-5
- 34ASTM A739 type B11
- 3214NiCr10 / 1.5732
- 32EN 38
- 30EN33 / EN 33