AMS 6498
2021-01-07 08:42:21 Origin： Remark：0 Click：
Description AMS 6498 datasheet, AMS 6498 Chemical, AMS 6498 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATASHEET - AMS 6498
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.29 ~ 0.36
Si (％): ≤ 0.30
Mn (％): 0.70 ~ 1.20
C (％): 0.29 ~ 0.36
Si (％): ≤ 0.30
Mn (％): 0.70 ~ 1.20
P (％)≤: 0.015
S (％)≤: 0.005
Cr (%): 1.10 ~ 1.60
Mo (%): 0.90 ~ 1.40
S (％)≤: 0.005
Cr (%): 1.10 ~ 1.60
Mo (%): 0.90 ~ 1.40
Ni (%): 0.50 ~ 1.00
V (%): 0.20 ~ 0.40
Al (%): 0.10 ~ 0.30
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1250
Yield strength, σ0.2/MPa: 1070
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 375 ~ 450
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 375 ~ 450
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR / VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by VIM followed by electroslag refining (ESR / VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B