40CrMoH
2024-01-22 08:19:32 Origin： Remark：0 Click：
IS 1570-5 Material Specification Refractory Steel 40CrMoH Round bar, flat bar, plate and forgings Instock 40CrMoH Heat treatment, Cold finished.
MATERIAL TECHNICAL DATASHEET - Grade 40CrMoH
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72284000 / 72286000
Available stock on hand - Round bar Diam. 25 ~ 170mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.36 ~ 0.44
Silicon, Si (％): 0.15 ~ 0.35
Manganese, Mn (％): 0.40 ~ 0.70
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 1.00 ~ 1.50
Nickel, Ni (％): -
Molybdenum, Mo (％): 0.50 ~ 0.80
Ferrum, Fe (%): balance
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72284000 / 72286000
Available stock on hand - Round bar Diam. 25 ~ 170mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.36 ~ 0.44
Silicon, Si (％): 0.15 ~ 0.35
Manganese, Mn (％): 0.40 ~ 0.70
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 1.00 ~ 1.50
Nickel, Ni (％): -
Molybdenum, Mo (％): 0.50 ~ 0.80
Ferrum, Fe (%): balance
MECHANICAL PROPERTY AT ROOM TEMPERATURE
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 850 ℃, water or oil cooling, tempering 560℃, air cooling.
Tensile strength, σb/≥ MPa: 1080
Yield strength, σ0.2/MPa: 930
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Hardness via annealing /HBW: 220
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 850 ℃, water or oil cooling, tempering 560℃, air cooling.
Tensile strength, σb/≥ MPa: 1080
Yield strength, σ0.2/MPa: 930
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Hardness via annealing /HBW: 220
PRODUCT DESCRIPTION
The alloy is usually produced by EAF +LF + VD / AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered.
The alloy is usually produced by EAF +LF + VD / AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered.
PROFILE & DIMENSIONS & SERVICE
Round bar & Disc (diameter): 5.5mm to 860mm
Square bar / Flat bar: 10mm to 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Round bar & Disc (diameter): 5.5mm to 860mm
Square bar / Flat bar: 10mm to 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：40CrMoH
Previous page：XT87W6Mo5Cr4V2
Last page：21CrMoVH
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B