20CrMoVTiBH
2024-02-06 08:55:16 Origin： Remark：0 Click：
IS 1570-5 Material Specification Refractory Steel 20CrMoVTiBH Round bar, flat bar, plate and forgings Stock Available 20CrMoVTiBH Heat treatment, Cold worked.
MATERIAL TECHNICAL DATASHEET - Grade 20CrMoVTiBH
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72285000 / 7228600 / 72284000
Available stock on hand - Round bar Diam. 20 ~ 130mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
MAIN CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.17 ~ 0.24
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 0.90 ~ 1.40
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): 0.80 ~ 1.10
Vanadium, V (%): 0.70 ~ 1.00
Titanium, Ti (%): 0.05 ~ 0.12
Boron, B (%): ≤ 0.005
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72285000 / 7228600 / 72284000
Available stock on hand - Round bar Diam. 20 ~ 130mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
MAIN CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.17 ~ 0.24
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 0.90 ~ 1.40
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): 0.80 ~ 1.10
Vanadium, V (%): 0.70 ~ 1.00
Titanium, Ti (%): 0.05 ~ 0.12
Boron, B (%): ≤ 0.005
MECHANICAL PROPERTY AT ROOM TEMPERATURE
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 860 ℃, water or oil cooling, tempering 620℃, air cooling.
Tensile strength, σb/≥ MPa: 800
Yield strength, σ0.2/MPa: 680
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): -
Hardness via annealing /HBW: 269 max.
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 860 ℃, water or oil cooling, tempering 620℃, air cooling.
Tensile strength, σb/≥ MPa: 800
Yield strength, σ0.2/MPa: 680
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): -
Hardness via annealing /HBW: 269 max.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF +LF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered.
The alloy is usually produced by EAF +LF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered.
PROFILE & DIMENSIONS & SERVICE
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：20CrMoVTiBH
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B