25CrMnSi
2024-11-15 06:14:00 Origin： Remark：0 Click：
GJB 1220A Specification for Alloy Structure Steel Bar for Artillery Parts 25CrMnSi Round bar, Flat bar, ESR ingot, forging block, Heat treated
MATERIAL DATA SHEET - GB 25CrMnSi
MATERIAL CATEGORY - Specification for Alloy Structure Steel Bar for Artillery Parts,
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 16 ~ 200mm
MATERIAL CATEGORY - Specification for Alloy Structure Steel Bar for Artillery Parts,
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 16 ~ 200mm
MATERIAL SPECIFICATIONS - GJB 1220A - 2008
PRODUCT PROFILE & DIMENSIONS
Round bar & disc (diameter): 5.5 ~ 800mm
Square bar / Flat bar: T6 ~ 400 X W 15 ~ 650 X Lmm
Length: Fixed length or random length or based on the customer's special requirement.
Plate & Sheet steel: T0.5 - 200 X W10 - 1500 X Lmm
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.22 ~ 0.28
Silicon, Si (％): 0.90 ~ 1.20
Manganese, Mn (％): 0.80 ~ 1.10
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 0.80 ~ 1.10
Nickel, Ni (%): ≤ 0.30
Molybdenum, Mo (％): -
Vanadium, V (％): -
Tungsten, W (%): -
Aluminum, Al (%): -
Titanium, Ti (%): -
Ferrum, Fe (%): remainder.
Round bar & disc (diameter): 5.5 ~ 800mm
Square bar / Flat bar: T6 ~ 400 X W 15 ~ 650 X Lmm
Length: Fixed length or random length or based on the customer's special requirement.
Plate & Sheet steel: T0.5 - 200 X W10 - 1500 X Lmm
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.22 ~ 0.28
Silicon, Si (％): 0.90 ~ 1.20
Manganese, Mn (％): 0.80 ~ 1.10
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 0.80 ~ 1.10
Nickel, Ni (%): ≤ 0.30
Molybdenum, Mo (％): -
Vanadium, V (％): -
Tungsten, W (%): -
Aluminum, Al (%): -
Titanium, Ti (%): -
Ferrum, Fe (%): remainder.
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Heat treatment temperature /℃| annealing: -.
Heat treatment temperature /℃| Normalizing: -
Heat treatment temperature /℃| Quenching: 880 oil
Heat treatment temperature /℃| Tempering : 480 water / oil
Hardness after annealing ≤HBW: 217 Max.
Tensile strength, Rm ≥ MPa: 785
Yield strength, Rp0.2 ≥ MPa: 635
Elongation, A ≥ (%): 12.0
Reduction of area, Z ≥ (%): 45.0
Impact strength, AKu ≥ J: 55
TECHNICAL SALES ASSISTANCE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) or call our resident team of qualified production engineers.
Hot search：
Previous page：53Cr21Mn9Ni4N
Last page：9Cr2
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B