20CrMnTi
2024-08-14 09:22:27 Origin： Remark：0 Click：
GJB 1220A Material Specification for Alloy Structure Steel Bar for Artillery Parts 20CrMnTi Round bar, Flat bar, Plate 20CrMnTi Forgings
MATERIAL STANDARD DATASHEET - GB 20CrMnTi
MATERIAL CATEGORY - Specification for Alloy Structure Steel Bar for Artillery Parts,
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 16 ~ 240mm, Plate, Sheet.
MATERIAL CATEGORY - Specification for Alloy Structure Steel Bar for Artillery Parts,
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 16 ~ 240mm, Plate, Sheet.
MATERIAL SPECIFICATIONS - GJB 1220A - 2008
PRODUCT PROFILE & DIMENSIONS
Round bar & Disc & Rod (diameter): 5.5 ~ 900mm
Square bar / Flat bar: T6 ~ 400 X W 15 ~ 650 X Lmm
Length: Fixed length or random length or based on the customer's special requirement.
Plate & Sheet steel: T0.5 - 200mm X W10 - 1500mm X L1000 - 12000mm
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
MAIN CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.17 ~ 0.23
Silicon, Si (％): 0.17 ~ 0.37
Manganese, Mn (％): 0.80 ~ 1.10
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 1.00 ~ 1.30
Nickel, Ni (%): ≤ 0.30
Molybdenum, Mo (％): -
Vanadium, V (％): -
Tungsten, W (%): -
Aluminum, Al (%): -
Titanium, Ti (%): 0.04 ~ 0.10
Ferrum, Fe (%): remainder.
Round bar & Disc & Rod (diameter): 5.5 ~ 900mm
Square bar / Flat bar: T6 ~ 400 X W 15 ~ 650 X Lmm
Length: Fixed length or random length or based on the customer's special requirement.
Plate & Sheet steel: T0.5 - 200mm X W10 - 1500mm X L1000 - 12000mm
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
MAIN CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.17 ~ 0.23
Silicon, Si (％): 0.17 ~ 0.37
Manganese, Mn (％): 0.80 ~ 1.10
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 1.00 ~ 1.30
Nickel, Ni (%): ≤ 0.30
Molybdenum, Mo (％): -
Vanadium, V (％): -
Tungsten, W (%): -
Aluminum, Al (%): -
Titanium, Ti (%): 0.04 ~ 0.10
Ferrum, Fe (%): remainder.
MECHANICAL PROPERTIES - HEAT TREATMENT AND HARDNESS
Heat treatment temperature /℃| annealing: -.
Heat treatment temperature /℃| Normalizing: -
Heat treatment temperature /℃| Quenching: 870 oil
Heat treatment temperature /℃| Tempering : 200 water / oil
Hardness after annealing ≤HBW: 217 Max.
Tensile strength, Rm ≥ MPa: 1080
Yield strength, Rp0.2 ≥ MPa: 850
Elongation, A ≥ (%): 10.0
Reduction of area, Z ≥ (%): 45.0
Impact strength, AKu ≥ J: 55
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
If you are interested in our products or services, or would like to learn more about us, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
Hot search：
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B