30CrMnSiNi2A
2024-10-04 08:35:05 Origin： Remark：0 Click：
GJB 1951-94 Material Specification for Quality Structure Steel Bars for Aviation 30CrMnSiNi2A Stock Available Round bar, Flat bar 30CrMnSiNi2A Heat treated
TECHNICAL DATA SHEET - GJB 30CrMnSiNi2A
MATERIAL CATEGORY - Specification for Quality Structure Steel Bars for Aviation.
MATERIAL CATEGORY - Specification for Quality Structure Steel Bars for Aviation.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD + LF / BEF / VIM followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
Stock Available: Round bar diam. 20 ~ 350mm, plate, sheet
PRODUCT PROFILE & DIMENSIONS
Round bar & Rod & Disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 8 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirements.
Plate & Sheet steel: T 2.0 ~ 350 X W 10 ~ 1500 X L mm
Round bar & Rod & Disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 8 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirements.
Plate & Sheet steel: T 2.0 ~ 350 X W 10 ~ 1500 X L mm
MATERIAL SPECIFICATIONS - GJB 1951 - 94
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C (％): 0.27 ~ 0.34
Manganese, Mn (％): 1.00 ~ 1.30
Silicon, Si (％): 0.90 ~ 1.20
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 0.90 ~ 1.20
Nickel, Ni (%): 1.40 ~ 1.80
Vanadium, V (％): -
Molybdenum, Mo (％): -
Tungsten, W (%): -
Ferrum, Fe (%): balance.
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C (％): 0.27 ~ 0.34
Manganese, Mn (％): 1.00 ~ 1.30
Silicon, Si (％): 0.90 ~ 1.20
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 0.90 ~ 1.20
Nickel, Ni (%): 1.40 ~ 1.80
Vanadium, V (％): -
Molybdenum, Mo (％): -
Tungsten, W (%): -
Ferrum, Fe (%): balance.
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT
Heat treatment temperature /℃| annealing: -.
Heat treatment temperature /℃| Normalizing: -
Heat treatment temperature /℃| Quenching: 890 ~ 900 oil or air cooling
Heat treatment temperature /℃| Tempering : 200 ~ 300 air cooling
Hardness after annealing, ≤ HBW: 255.
Tensile strength, Rm ≥ MPa: 1570
Yield strength, Rp0.2 ≥ MPa: -
Elongation, A5 ≥ (%): 9.0
Reduction of area, Z ≥ (%): 45.0
Impact strength, AKu ≥ J: 47
Hardness after final heat treatment / HBW: 444 min.
Hardness after annealing, ≤ HBW: 255.
Tensile strength, Rm ≥ MPa: 1570
Yield strength, Rp0.2 ≥ MPa: -
Elongation, A5 ≥ (%): 9.0
Reduction of area, Z ≥ (%): 45.0
Impact strength, AKu ≥ J: 47
Hardness after final heat treatment / HBW: 444 min.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
If you are interested in our products or services, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
Hot search：
Total list
Monthly rank
- 3624CrMo5
- 3338NCD4
- 33EN 14B
- 3342Cr4Mo2
- 28EN33 / EN 33
- 27ASTM A739 type B11
- 22EN 38
- 22XC38
- 2231Ni10Cr3Mo6
- 2226NiCrMoV11-5