1.3565 Stockist, 1.3565 Equivalent Steel

1.3565
2014-11-04 16:08:12   Origin:   Remark:0 Click:

Specifications 1.3565, 1.3565 Chemical, 1.3565 Properties from steelmaking, Hot forging & Hot rolling, Heat treatment, Cold working.We also possess advanced precision machining equipments for further processing
MATERIAL TECHNICAL DATA SHEET - W-Nr 1.3565
MATERIAL CATEGORY: hardened and tempered steel 
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT 
MATERIAL SPECIFICATIONS  
DIN EN 10083-2 (2006), DIN 17200 (1987) 
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     0.46 ~ 0.52
Si  (%):    ≤ 0.40
Mn (%):   0.50 ~ 0.80
P (%)≤:   0.025
S (%)≤:   0.025
Cr (%):    0.90 ~ 1.20
Mo (%):   0.15 ~ 0.30
Ni (%):    -
Cu (%):   ≤ 0.30
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working temperature /℃:    1050~850
Heat treatment temperature /℃| annealing:     680~720
Heat treatment temperature /℃| Normalizing:  840~880
Heat treatment temperature /℃| Quenching:    830~860oil
Heat treatment temperature /℃| Tempering :  540~680
Hardness after annealing ≤HBS:    255
Steel dimension /mm:    ≤16
Tensile strength, |σb≥/MPa: 1080 ~ 1270
Yield strength, |σs≥/MPa: 880
Elongation, |δ5≥/(%): 9.0
Reduction of area, |ψ≥/(%): 40.0
Impact, |AKV≥/J:  35
Steel dimension /mm:   17 - 40
TS, |σb≥/MPa:   980 ~ 1180
YS, |σs≥/MPa:    760
EL, |δ5≥/(%):    11
RA, |ψ≥/(%):     45
Impact, |AKV≥/J:      35
Steel dimension /mm:   41 - 100
|σb≥/MPa:  880 ~ 1080
|σs≥/MPa:  690
|δ5≥/(%):   12
|ψ≥/(%):    50
|AKV≥/J:     35
AVAILABLE SHAPES  
Black bar / Flat bar / Square bar / Steel strip / Sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. 
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) or call our resident team of qualified production engineers.
PRODUCT PROFILE  
Round bar / Wire rod (Diameter):  5.5mm to 800mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Steel strip: 0.1mm to 1200mm
Width: 8mm to 1200mm
Steel sheet: thickness 0.50 ~ 6.00mm, width 1000mm X length 1000/2000mm - Standard size
Length: random length or based on the customer's special requirement
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM
Pipes / Tubings: OD30 - 1200 mm, with wall thickness ranging from 15 to 350 mm 

Hot search:1.3565

Previous page:48CrMo4
Last page:S46500

Share to: