X22CrMoV12-1 QT1
2016-04-08 14:50:15 Origin: Remark:0 Click:
Specifications X22CrMoV12-1 QT1 Datasheet, X22CrMoV12-1 QT1 Chemical, X22CrMoV12-1 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification - DIN EN 10269 - 2006.
TECHNICAL DATA SHEET - X22CrMoV12-1 QT1
Official Test Certificate Report: issued by TUV - SGS - BV
MATERIAL TYPE - alloy steel applied for fasteners
MATERIAL STANDARDS - DIN EN 10269-2006
CHEMICAL COMPOSITION (WEIGHT %)
C (%): 0.18 ~ 0.24
Si (%): ≤ 0.50
MATERIAL STANDARDS - DIN EN 10269-2006
CHEMICAL COMPOSITION (WEIGHT %)
C (%): 0.18 ~ 0.24
Si (%): ≤ 0.50
Mn (%): 0.40 ~ 0.90
P (%)≤: 0.025
S (%)≤: 0.015
Cr (%): 11.0 ~ 12.5
P (%)≤: 0.025
S (%)≤: 0.015
Cr (%): 11.0 ~ 12.5
Mo (%): 0.80 ~ 1.20
Ni (%): 0.30 ~ 0.80
V (%): 0.25 ~ 0.35
B (%): -
MECHANICAL PROPERTIES AT ROOM TEMPERTAURE
Heat treatment condition: + A
Heat treatment condition: + A
σb/≥ MPa: -
ф ≥ (%): -
Hardness value: 302 Max.
MECHANICAL PROPERTIES AT ROOM TEMPERTAURE
Heat treatment condition: + QT1
Diameter d /mm: ≤ 160
Normalizing, quenching or solution annealing temperature: 1020~1070
Type of cooling: air/water/oil
Tempering temperature: 680~740 ( Min. 2h )
Tensile strength, σb/≥ MPa: 800~950
Yield strength, σ0.2/≥ MPa: 600
Elongation, δ ≥(%): 14.0
Elongation, δ ≥(%): 14.0
Reduction of area, ф ≥ (%): 40.0
Impact AKv /J: 27