AISI 690
2016-07-18 11:13:37 Origin： Remark：0 Click：
AISI 690 Data sheet, ASTM 690 Chemical, AISI 690 Properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. We also possess the advanced precision machining equipments for further processing. Please just let us know what you inquire.
TECHNICAL SPECIFICATION - AISI 690 & Refractaloy 26
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: American high temperature alloy and other special alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.08
Si (％): 0.50 ~ 1.50
Mn (％): 0.40 ~ 1.00
P (％)≤: 0.030
S (％)≤: 0.015
Cr (％): 16.0 ~ 20.0
Ni (％): 35.0 ~ 39.0
Mo (％): 3.00 ~ 3.40
Si (％): 0.50 ~ 1.50
Mn (％): 0.40 ~ 1.00
P (％)≤: 0.030
S (％)≤: 0.015
Cr (％): 16.0 ~ 20.0
Ni (％): 35.0 ~ 39.0
Mo (％): 3.00 ~ 3.40
Co (%): 16.0 ~ 22.0
W (%): -
Al (%): ≤ 0.30
Cu (%): -
Ti (%): 2.50 ~ 3.00
B (%): 0.001 ~ 0.010
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, σb/≥ MPa: 1000
Yield strength, σ0.2/≥ MPa: 550
Elongation, δ ≥(％): 15.0
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 20.0
Hardness | HB: 262 ~ 331
TYPICAL APPLICATIONS
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on.
Heat treating fixture
Furnace muffle
Nuclear reactor
Furnace muffle
Nuclear reactor
Turbine engine parts - mechanical gears, gear shaft, main axis, blade
Mechanical parts - bolt and nut, fastener
Gas turbine
Turbine blade
Fuel nozzle
Turbine blade
Fuel nozzle
Heat treatment furnace flask and components, especially in the carbonization.
These materials must stand up to high heat, extreme oxidation potential and recycling.
These materials must stand up to high heat, extreme oxidation potential and recycling.
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Square bar / Flat bar: 10mm to 500mm
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Previous page：Alloy 33
Last page：Refractaloy 26
