INCOLOY 800 / N08800
2016-09-24 15:39:18 Origin： Remark：0 Click：
Standard specification for Nickel - Iron - Chromium alloy rod and bar UNS N08800 datasheet, Chemical compositions, mechanical properties from Steel making, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. Technical specification ASTM B408 - 2006.
MATERIAL STANDARD SPECIFICATION - INCOLOY 800 / N08800
TECHNICAL SPECIFICATION: ASTM B408 - 2006
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Nickel - Iron - Chromium alloy rod and bar
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.10
Si (％): ≤ 1.00
Mn (％): ≤ 1.50
P (％) ≤: 0.045
S (％) ≤: 0.015
Cr (％): 19.0 ~ 23.0
Ni (％): 30.0 ~ 35.0
Mo (％): -
Nb (%): 0.40 ~ 0.90
Ti (%): 0.15 ~ 0.60
Cu (%): ≤ 0.75
Al (%): 0.15 ~ 0.60
Al (%): 0.15 ~ 0.60
W (%): -
Co (%): -
Co (%): -
N (%): -
B (%): -
Fe (%): 39.5 Min.
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Form: Rod and bar
Condition: cold worked and hot worked, annealed at 1150 Deg. min.
Tensile strength,σb/≥ MPa: 550
Yield strength, σ0.2/≥ MPa: 240
Elongation, δ ≥(％): 25.0
Reduction of area, ф ≥ (％): -
Hardness | HRC: -
Fe (%): 39.5 Min.
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Form: Rod and bar
Condition: cold worked and hot worked, annealed at 1150 Deg. min.
Tensile strength,σb/≥ MPa: 550
Yield strength, σ0.2/≥ MPa: 240
Elongation, δ ≥(％): 25.0
Reduction of area, ф ≥ (％): -
Hardness | HRC: -
Service temperature: above 593 Deg.
TYPICAL APPLICATIONS
Heat treating fixture
Furnace muffle
Nuclear reactor
TYPICAL APPLICATIONS
Heat treating fixture
Furnace muffle
Nuclear reactor
Turbine engine parts - mechanical gears, gear shaft, main axis, blade
Mechanical parts - bolt and nut, fastener
Gas turbine
Turbine blade
Fuel nozzle
Turbine blade
Fuel nozzle
These materials must stand up to high heat, extreme oxidation potential and recycling.
FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Hot search：INCOLOY 800/N08800
Previous page：ASTM B408 N08800
Last page：14NiCr14
