B637 Gr.N07500
2016-10-25 13:19:32 Origin: Remark:0 Click:
Standard specification for precipitation hardening and cold worked nickel alloy N07500 bar, forgings and forging stock N07500 ESR melted, Heat treatment
TECHNICAL SPECIFICATION - ASTM B637 GRADE N07500
TECHNICAL SPECIFICATION: ASTM B637 - 2011
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Precipitation hardening and cold worked nickel alloy
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.15
Silicon, Si (%): ≤ 0.75
Manganese, Mn (%): ≤ 0.75
Phosphorus, P (%) ≤: 0.015
Sulfur, S (%) ≤: 0.015
Chromium, Cr (%): 15.0 ~ 20.0
Cobalt, Co (%): 13.0 ~ 20.0
Molybdenum, Mo (%): 3.00 ~ 5.00
Niobium, Nb/Ta (%): -
Titanium, Ti (%): 2.50 ~ 3.25
Aluminum, Al (%): 2.50 ~ 3.25
Zirconium, Zr (%): 0.02 ~ 0.12
Boron, B (%): 0.003 ~ 0.010
Ferrum, Fe (%): ≤ 4.00
Copper, Cu (%): ≤ 0.15
Nickel, Ni (%): Remainder
Tantalum, Ta (%): -
Nickel, Ni (%): Remainder
Tantalum, Ta (%): -
Tungsten, W (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: Solution + Stabilize + Precipitation harden
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: Solution + Stabilize + Precipitation harden
eat treatment pratice: Solution treatment 1080+/-14 Deg. hold 4h, air cool.
Stabilizing treatment 843+/-14 Deg. hold 24h, air cool.
Precipitation hardening treatment, 760+/-14 Deg, hold 16h, air cooled or furnace cool.
Tensile strength,σb/≥ MPa: 1120
Tensile strength,σb/≥ MPa: 1120
Yield strength, σ0.2/≥ MPa: 725
Elongation, δ ≥(%): 15.0
Reduction of area, ф ≥ (%): 15.0
Hardness | HBW: 310 min.
STRESS RUPTURE REQUIREMENT
Test temperature: 816 Deg.
Stress /MPa: 260
Time to rupture: 100h
Elongtation, (%): 5.0
TYPICAL APPLICATIONS
Starndard specification for high-temperature bolting, with expansion coefficients comparable to austenitic stainless steel with yield strength ranging from 345 to 827 MPa for use in high-temperature service such as fasteners for pressure vessel and valve flanges.
Nuclear reactor, Turbine engine parts - mechanical gears, gear shaft, main axis, blade.
Mechanical parts - bolt and nut, fastener.
Gas turbine blade, Fuel nozzle.
These materials must stand up to high heat, extreme oxidation potential and recycling.
FORMS AND DIMENSIONS
Round bar (diameter): 2.00mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Forging piece: stepped shafts, other different shapes based on OEM.
Elongation, δ ≥(%): 15.0
Reduction of area, ф ≥ (%): 15.0
Hardness | HBW: 310 min.
STRESS RUPTURE REQUIREMENT
Test temperature: 816 Deg.
Stress /MPa: 260
Time to rupture: 100h
Elongtation, (%): 5.0
TYPICAL APPLICATIONS
Starndard specification for high-temperature bolting, with expansion coefficients comparable to austenitic stainless steel with yield strength ranging from 345 to 827 MPa for use in high-temperature service such as fasteners for pressure vessel and valve flanges.
Nuclear reactor, Turbine engine parts - mechanical gears, gear shaft, main axis, blade.
Mechanical parts - bolt and nut, fastener.
Gas turbine blade, Fuel nozzle.
These materials must stand up to high heat, extreme oxidation potential and recycling.
FORMS AND DIMENSIONS
Round bar (diameter): 2.00mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Previous page:ASTM B637 Gr.684
Last page:1335H/H13350