UNS N06025
2017-02-23 10:40:17 Origin： Remark：0 Click：
Nickel alloy forgings Grade UNS N06025 in Forms of Round bar, flat bar, plate and forgings. N06025 mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined.
TECHNICAL DATA SHEET - ASTM B564-04 Grade UNS N06025
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Ni - Cr - Fe Alloy
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.15 ~ 0.25
Si (％): ≤ 0.10
Mn (％): ≤ 0.15
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 24.0 ~ 26.0
Ni (％): Balance
Mo (％): -
Cu (%): ≤ 0.10
Al (%): 1.80 ~ 2.40
Ti (%): 0.10 ~ 0.20
Zr (%): 0.01 ~ 0.10
Y (%): 0.01 ~ 0.12
W (%): -
Fe (%): 8.00 ~ 11.0
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 680
Yield strength, σ0.2/≥ MPa: 270
Elonghation, δ ≥(％): 30.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
SHAPES & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 10mm to 500mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 680
Yield strength, σ0.2/≥ MPa: 270
Elonghation, δ ≥(％): 30.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
SHAPES & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 10mm to 500mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：SK105M/SK3M
Last page：UNS N06045
