N06058
2017-03-03 09:47:10 Origin： Remark：0 Click：
Specifications N06058 data sheet, N06058 Chemical, N06058 Properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treat, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - ASTM B564-04 Grade UNS N06058
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Low-carbon -Ni-Cr-Mo Alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
MATERIAL CATEGORY: Low-carbon -Ni-Cr-Mo Alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
Si (％): ≤ 0.10
Mn (％): ≤ 0.50
P (％) ≤: 0.015
S (％) ≤: 0.010
Cr (％): 20.0 ~ 23.0
Ni (％): Balance
Mo (％): 19.0 ~ 21.0
Cu (%): ≤ 0.50
Mn (％): ≤ 0.50
P (％) ≤: 0.015
S (％) ≤: 0.010
Cr (％): 20.0 ~ 23.0
Ni (％): Balance
Mo (％): 19.0 ~ 21.0
Cu (%): ≤ 0.50
Al (%): ≤ 0.40
Ti (%): -
Ce (%): ≤ 0.30
Zr (%): -
Y (%): -
Nb (%): -
Co (%): -
V (%): -
N (%): 0.02 ~ 0.15
B (%): -
W (%): ≤ 0.30
W (%): ≤ 0.30
Ta (%): -
Fe (%): 1.50 max.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 760
Yield strength, σ0.2/≥ MPa: 360
Elonghation, δ ≥(％): 40.0
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T6 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 600mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Fe (%): 1.50 max.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 760
Yield strength, σ0.2/≥ MPa: 360
Elonghation, δ ≥(％): 40.0
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T6 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 600mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：N06058
Previous page：SKS5M
Last page：UNS N06035
