B166 Gr.N06600
2017-03-28 15:48:52 Origin： Remark：0 Click：
Technical specification of ASTM B166-2011 Nickel-Chromium-Iron alloy N06600 Sheet, Flat bar, Plate Round bar Steelmaking, ESR melted, Hot forging/rolling, Heat treatment, Cold machined.
TECHNICAL DATA SHEET - ASTM B166-11 Grade UNS N06600
TECHNICAL SPECIFICATION: ASTM B166-2011
CHEMICAL COMPOSITION (mass weight %)
C (％): ≤ 0.15
C (％): ≤ 0.15
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 min.
Mo (％): -
Mn (％): ≤ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 min.
Mo (％): -
Cu (%): ≤ 0.50
Al (%): -
Ti (%): -
Zr (%): -
Y (%): -
Nb (%): -
Co (%): -
N (%): -
B (%): -
W (%): -
Fe (%): 6.0 ~ 10.0
MECHANICAL PROPERTIES
Condition: Hot worked, solution treated
Tensile strength, σb/≥ MPa: 655
MECHANICAL PROPERTIES
Condition: Hot worked, solution treated
Tensile strength, σb/≥ MPa: 655
Yield strength, σ0.2/≥ MPa: 310
Elonghation, δ ≥(％): 20.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged.
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Elonghation, δ ≥(％): 20.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged.
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.25 ~ 3.00, W5.0 ~ 500, in coil form
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Previous page：EN16T/605M36
Last page：NF X1CrNiMoCuN24-22-8
