B166 type N06674
2017-04-05 08:54:16 Origin： Remark：0 Click：
Technical specifications of ASTM B166-2011 Nickel-Chromium-Iron alloy N00674 datasheet, B166 type N06674 Chemical compositions, B166 type N06674 mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - ASTM B166 Grade UNS N06674
TECHNICAL SPECIFICATION: ASTM B166-2011
MATERIAL CATEGORY: Ni-Fe-Cr-W Alloy
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
C (％): ≤ 0.010
Si (％): ≤ 1.00
Mn (％): ≤ 1.50
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 21.5 ~ 24.5
Ni (％): remainder
Mo (％): -
Mn (％): ≤ 1.50
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 21.5 ~ 24.5
Ni (％): remainder
Mo (％): -
Cu (%): -
Al (%): -
Ti (%): 0.05 ~ 0.20
Zr (%): -
Y (%): -
Nb (%): 0.10 ~ 0.35
Co (%): -
N (%): ≤ 0.02
B (%): 0.0005 ~ 0.006
W (%): 6.00 ~ 8.00
Fe (%): 20.0 ~ 27.0
MECHANICAL PROPERTIES
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 590
MECHANICAL PROPERTIES
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 590
Yield strength, σ0.2/≥ MPa: 235
Elonghation, δ ≥(％): 30.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.25 ~ 3.00, W5.0 ~ 500, in coil form
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：NF X1CrNiMoCuNW24-22-6
Last page：C140E3U
