B166 type N06693
2017-04-07 09:07:28 Origin： Remark：0 Click：
N06693 data sheet, N06693 Chemical, N06693 mechanical properties from Steelmaking, ESR melted, Blooming, Hot forging & rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - ASTM B166 Grade UNS N06693
TECHNICAL SPECIFICATION: ASTM B166-2011
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.15
C (％): ≤ 0.15
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.010
Cr (％): 27.0 ~ 31.0
Ni (％): Remainder
Mo (％): -
Mn (％): ≤ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.010
Cr (％): 27.0 ~ 31.0
Ni (％): Remainder
Mo (％): -
Cu (%): ≤ 0.50
Al (%): 2.50 ~ 4.00
Ti (%): ≤ 1.00
Zr (%): -
Y (%): -
Nb (%): 0.50 ~ 2.50
Co (%): -
N (%): -
B (%): -
W (%): -
Fe (%): 2.50 ~ 6.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 690
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 690
Yield strength, σ0.2/≥ MPa: 345
Elonghation, δ ≥(％): 30.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.25 ~ 3.00, W5.0 ~ 500, in coil form
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Previous page：AMS 6270L
Last page：Inconel 693
