B166 Gr.N06045
2017-04-15 14:13:53 Origin： Remark：0 Click：
Technical specifications of ASTM B166-2011 Nickel-Chromium-Iron alloy N06045 datasheet, N06045 Chemical compositions, N06045 mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - ASTM B166 Grade UNS N06045
TECHNICAL SPECIFICATION: ASTM B166-2011
MATERIAL CATEGORY: Ni-Cr-Fe Alloy
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.05 ~ 0.12
C (％): 0.05 ~ 0.12
Si (％): 2.50 ~ 3.00
Mn (％): ≤ 1.00
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 26.0 ~ 29.0
Ni (％): 45.0 min.
Mo (％): -
Mn (％): ≤ 1.00
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 26.0 ~ 29.0
Ni (％): 45.0 min.
Mo (％): -
Cu (%): ≤ 0.30
Al (%): -
Ti (%): -
Zr (%): -
Y (%): -
Nb (%): -
Co (%): -
N (%): -
B (%): -
W (%): -
Ce (%): 0.03 ~ 0.09
Fe (%): 21.0 ~ 25.0
MECHANICAL PROPERTIES
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 620
MECHANICAL PROPERTIES
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 620
Yield strength, σ0.2/≥ MPa: 240
Elonghation, δ ≥(％): 35.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.25 ~ 3.00, W5.0 ~ 500, in coil form
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：C38E4U
Last page：B166 Gr.N06603
