Alumel
2017-05-29 10:12:36 Origin： Remark：0 Click：
Technical specifications of American high temperature alloys Alumel datasheet,Gr.Alumel Chemical compositions,Alumel mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling,Grade Alumel Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power.100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATION & DATASHEET - Grade Alumel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: American high temperature alloy and other special alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.15
Si (％): 1.30 ~ 1.90
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 9.00 ~ 11.0
Ni (％): Balance
Mo (％): -
Si (％): 1.30 ~ 1.90
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 9.00 ~ 11.0
Ni (％): Balance
Mo (％): -
Co (%): -
W (%): -
Al (%): ≤ 0.20
Cu (%): -
Ti (%): -
Fe (%): ≤ 0.50
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 800mm
Square bar / Flat bar: 3mm to 500mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Square bar / Flat bar: 3mm to 500mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Hot search：Alumel
Previous page：BS T77
Last page：Alloy 52/N14052
