Custom 450
2024-11-16 15:12:00 Origin： Remark：0 Click：
Specifications Custom 450 Round bar, Flat bar, Forgings Blank Custom 450 ESR ingot Stock Available, Properties Hot forging Hot rolling, Heat treatment
MATERIAL DATA SHEET - Custom 450
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL TYPE: Custom 450 (S41500) stainless has very good corrosion resistance with moderate strength. A single-step aging treatment develops higher strength with good ductility and toughness.
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.030
C (％): ≤ 0.05
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.030
S (％)≤: 0.025
Cr (％): 14.0 ~ 16.0
Cr (％): 14.0 ~ 16.0
Ni (％): 5.00 ~ 7.00
Mo (％): 0.50 ~ 1.00
Co (%): -
Co (%): -
W (%): -
Al (%): -
Al (%): -
Cu (%): 1.25 ~ 1.75
Ti (%): -
Ti (%): -
Nb (%): 8 X C Min.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 895
Yield strength, σ0.2/≥ MPa: 655
Elongation, δ ≥(％): 10.0
Reduction of area, ф ≥ (％): 40.0
Hardness | HBW: HRC 32 min.
Elongation, δ ≥(％): 10.0
Reduction of area, ф ≥ (％): 40.0
Hardness | HBW: HRC 32 min.
FORMS AND SHAPES
Round bar / rod / disc (diameter): 5.5mm to 650mm
Square bar / Flat bar: 10mm to 450mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Round bar / rod / disc (diameter): 5.5mm to 650mm
Square bar / Flat bar: 10mm to 450mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our qualified production engineers.
Previous page：709M40
Last page：Custom 455
