AMS 6512
2018-04-12 11:04:25 Origin： Remark：0 Click：
Specifications AMS 6512 Datasheet, Maraging 250 Chemical, AMS 6512 Properties Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment,Straightening,Ultrasonic test, Cold working or Machined. Technical specification - AMS 6512D. We also possess the advanced precision machining equipments for further processing. Please just let us know what you inquire.
AEROSPACE MATERIAL DATA SHEET - AMS 6512
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - maraging series steel
MATERIAL STANDARDS - AMS 6512D
HS CODE - 72221090 / 72222000
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 0.10
Mn (％): ≤ 0.10
P (％)≤: 0.010
S (％)≤: 0.010
Cr (％): ≤ 0.50
Ni (％): 17.0 ~ 19.0
Mo (％): 4.60 ~ 5.20
Si (％): ≤ 0.10
Mn (％): ≤ 0.10
P (％)≤: 0.010
S (％)≤: 0.010
Cr (％): ≤ 0.50
Ni (％): 17.0 ~ 19.0
Mo (％): 4.60 ~ 5.20
Co (%): 7.00 ~ 8.50
Ti (%): 0.30 ~ 0.60
Al (％): 0.05 ~ 0.15
Others (%): Cu ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: after maraging heat treated 480 ℃
Tensile strength, σb/≥ MPa: 1750
Yield strength, σ0.2/≥ MPa: 1720
Elongation, δ ≥(％): 6.0
Elongation, δ ≥(％): 6.0
Reduction of area, ф ≥ (％): -
Hardness | HRC: 48 min.
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Emails us: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Emails us: sales@ccsteels.com.
Previous page：525H60
Last page：Z3CNU18-10
