X12CrMoV12-6
2019-04-30 13:22:07 Origin： Remark：0 Click：
Specifications ISO / TR 4956 - 1984 of Steel X12CrMoV12-6 ESR melting, Hot blooming, UT, Hot forging/rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined.
TECHNICAL DATA SHEET - X12CrMoV12-6
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL SPECIFICATIONS: ISO / TR 4956 - 1984
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.08 ~ 0.16
Silicon, Si (％): ≤ 0.60
Manganese, Mn (％): 0.40 ~ 1.00
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 11.5 ~ 13.0
Silicon, Si (％): ≤ 0.60
Manganese, Mn (％): 0.40 ~ 1.00
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 11.5 ~ 13.0
Nickel, Ni (%): ≤ 1.00
Molybdenum, Mo (％): 0.40 ~ 0.80
Molybdenum, Mo (％): 0.40 ~ 0.80
Vanadium, V (%): 0.10 ~ 0.30
TYPICAL MECHANICAL PROPERTIES
Condition of heat treatment: Quenched and tempered
Tensile strength, σb ≥/MPa: 770 ~ 930
Yield strength, σ0.2 ≥/MPa: 585
Yield strength, σ0.2 ≥/MPa: 585
Elontation, δ ≥(％): 15.0
Reduction of area, ф ≥(％): -
Hardness | HBW: 275 max.
Reduction of area, ф ≥(％): -
Hardness | HBW: 275 max.
FORMS AND DIMENSIONS
Round bar & Disc (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Round bar & Disc (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Hot search：X12CrMoV12-6
Previous page：X12CrMoV12-6
Last page：X12CrMo12-6
