Inconel 600
2019-06-05 09:16:00 Origin： Remark：0 Click：
Stocklist Inconel 600 Datasheet, Specifications Inconel 600 Chemical, Inventory Inconel 600 Stock property Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade Inconel 600
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): ≤ 0.15
C (％): ≤ 0.15
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
P (％)≤: 0.025
Mn (％): ≤ 1.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 min.
Mo (％): -
Co (%): -
Co (%): -
W (%): -
Al (%): -
Al (%): -
Cu (%): ≤ 0.50
Ti (%): -
Fe (% ): 6.00 ~ 10.0
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 550 ~ 690
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 45.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL ( sales@ccsteels.com ) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL ( sales@ccsteels.com ) our qualified production engineers.
Previous page：Inconel 600
Last page：12-2W & S41800
