S151D
2019-12-31 15:18:58 Origin： Remark：0 Click：
Martensitic Stainlless Steel S151D Round bar, Flat bar S151D Turbine Steel Forgings Steelmaking, ESR melted, Hot forging / rolling, Heat treatment.
MATERIAL TECHNICAL DATA SHEET - BS S151
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY: 12Cr - 3Ni - 2Mo based alloy (On hand Stock - Diam. 50 ~ 200mm)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.08 ~ 0.13
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00
Nitrogen, N (%): 0.01 ~ 0.05
Vanadium, V (%): 0.25 ~ 0.40
Copper, Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition / Bar: Solution treated
Tensile strength, σb/≥ MPa: 930 ~ 1130
Yield strength, σ0.2/≥ MPa: 780
Elongation, δ ≥(％): 14.0
Elongation, δ ≥(％): 14.0
Reduction of area, ф ≥ (％): -
Hardness | HB: 280 ~ 310
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 10mm to 600mm
Forging piece: stepped shafts, and other different shapes based on OEM.
Square bar / Flat bar: 10mm to 600mm
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：S151D
