K92890
2020-01-03 09:26:21 Origin： Remark：0 Click：
K92890 Wholesalers Steels, K92890 Ex-stock Suppliers & Manufacturers, K92890 Forge Bar plate machined, K92890 Alloy exporter, from Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL DATASHEET - UNS K92890
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: maraging stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 0.10
Mn (％): ≤ 0.10
P (％)≤: 0.010
S (％)≤: 0.010
Cr (％): ≤ 0.50
Ni (％): 18.0 ~ 19.0
Mo (％): 4.60 ~ 5.20
Si (％): ≤ 0.10
Mn (％): ≤ 0.10
P (％)≤: 0.010
S (％)≤: 0.010
Cr (％): ≤ 0.50
Ni (％): 18.0 ~ 19.0
Mo (％): 4.60 ~ 5.20
Co (%): 7.00 ~ 8.50
Ti (%): 0.30 ~ 0.50
Other (％): Al 0.05 ~ 0.15, Cu ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: after maraging heat treated
Tensile strength, σb/≥ MPa: 1750
Yield strength, σ0.2/≥ MPa: 1850
Elongation, δ ≥(％): 6.0
Elongation, δ ≥(％): 6.0
Reduction of area, ф ≥ (％): -
Hardness | HRC: 48 min.
The alloy is usually produced by VIM followed by electroslag refining (ESR / VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T60 - 300mm X W100 - 600mm X L1000 - 4000mm
Sheet steel via cold rolled: T1.0 - 4mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T1.0 - 4mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：K92890
Previous page：AMS 6497
Last page：A182 Grade FR
