S165M / 1.4418
2020-03-04 17:34:15 Origin： Remark：0 Click：
S165M / 1.4418 is a high tensile low carbon martensitic Stainless steel. it is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc.
TECHNICAL DATA SHEET - Grade Alloy S165M
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: S165M is a high strength low carbon matensitic stainless steel
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): 0.30 ~ 0.70
Manganese, Mn (％): 0.60 ~ 1.50
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 15.0 ~ 17.0
Nickel, Ni (％): 4.00 ~ 6.00
Molybdenum, Mo (%): 0.80 ~ 1.50
Nitrogen, N (%): -
TYPICAL MECHANICAL PROPERTY
Tensile strength, σb/ ≥ MPa: 1050
Yield strength, σ0.2/ ≥ MPa: 920
Elongation, δ (％) ≥: 18.0
Reduction of area, ф (％) ≥: -
Hardness ≤ (HBW): 300 Min.
MELTING PROCESS
The alloy is usually produced by BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
PRODUCT FORMS AVAILABLE
Round bar (Diameter): 5.50 ~ 800mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (width X thickness): 15 ~ 1000 X 10 ~ 400mm
Length: random length, fixed length or based on the customer's special requirement.
Form: Flat bar, forged slices and round bar.
The alloy is usually produced by BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
PRODUCT FORMS AVAILABLE
Round bar (Diameter): 5.50 ~ 800mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (width X thickness): 15 ~ 1000 X 10 ~ 400mm
Length: random length, fixed length or based on the customer's special requirement.
Form: Flat bar, forged slices and round bar.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：S165M / S165
Last page：1.5622
