AMS 5936
2020-04-22 14:13:26 Origin： Remark：0 Click：
Material Specifications AMS 5936 Sheet, Ex-stock AMS 5936 Suppliers, Bars AMS 5936 Properties steelmaking, Hot forging & Rolling, Heat treatment, Cold working.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - AMS 5936
MATERIAL CATEGORY: Precipitation hardening stainless steel
MATERIAL SPECIFICATIONS: ASTM A564, A693, AMS 5936D
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.020
Silicon, Si (％): ≤ 0.25
Manganese, Mn (％): ≤ 0.25
Phosphorus, P (％)≤: 0.015
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 10.7 ~ 11.3
Molybdenum, Mo (％): 0.75 ~ 1.25
Nitrogen, N (&): -
Titanium, Ti (％): 1.50 ~ 1.80
Silicon, Si (％): ≤ 0.25
Manganese, Mn (％): ≤ 0.25
Phosphorus, P (％)≤: 0.015
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 10.7 ~ 11.3
Molybdenum, Mo (％): 0.75 ~ 1.25
Nitrogen, N (&): -
Titanium, Ti (％): 1.50 ~ 1.80
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Forms: bar, steel plate, strip
Condition: solution treatment
Tensile strength, σb/MPa: 1215
Yield strength, σ0.2/MPa: 1100
Elongation, δ (％): 14.0
Reduction of area, ф (％): 34
Elongation, δ (％): 14.0
Reduction of area, ф (％): 34
Hardness | HRW: 361min, HRC 36min.
The alloy is usually produced by BEF + AOD / EAF VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + Aged.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to Email our resident team of qualified production engineers, Email: sales@ccsteels.com
PRODUCT PROFILE
Round bar / Disc (diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Previous page：Custom 465
Last page：F429
