St17-13W
2020-05-01 16:29:47 Origin： Remark：0 Click：
Inventory St17-13W Chemical, Exporters St17-13W Specification, Forging St17-13W Steelmaking, Hot Blooming, Forging, Rolling, Heat treat, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
TECHNICAL DATA SHEET - Grade St17-13W
MATERIAL CATEGORY - Corrosion resisting alloy steel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TYPE OF STEEL - Cr-Ni-W-Ti Steel
CHEMICAL COMPOSITION (WEIGHT %)
Carbon, C (％): 0.07 ~ 0.12
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Niobium, Ni (%): 12.0 ~ 14.0
Tungsten, W (％): 2.50 ~ 4.00
Titanium, Ti (%): 4 X C ~ 0.80
Boron, B (%): 0.001 ~ 0.006
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength σb≥/MPa: 500 ~ 700
Yield strength σs≥/MPa: 245
Elongation δ5≥(%): 30.0
Yield strength σs≥/MPa: 245
Elongation δ5≥(%): 30.0
AKV≥/J: -
PRODUCT MELTING PROCESS
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 10mm to 650mm
Length: Fixed length or random length or based on the customer's special requirement.
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
TYPICAL APPLICATIONS
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Automobile parts, exhaust pipe
Electronics
Turbine motor blade
Bolts and nuts
Bolts and nuts
Valve
Pressure vessel
PRODUCT PROFILE & FORMSPressure vessel
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 10mm to 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.5 - 3mm X W10 - 200mm X L (or in coil form)
Forged piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forged piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：St17-13W
