L605
2021-03-06 09:33:22 Origin： Remark：0 Click：
Specifications L605 datasheet, L605 Chemical, Ex-stock L605 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL STANDARDS DATA SHEET - Grade Alloy L605
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
INVENTORY ON STOCK - Wire rod (0.2mm, 0.5mm, 1.0mm)
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.05 ~ 0.15
Si (％): ≤ 0.40
Mn (％): 1.00 ~ 2.00
P (％)≤: 0.025
C (％): 0.05 ~ 0.15
Si (％): ≤ 0.40
Mn (％): 1.00 ~ 2.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 19.0 ~ 21.0
Cr (％): 19.0 ~ 21.0
Ni (％): 9.00 ~ 10.0
Mo (％): -
Co (%): Remainder
Co (%): Remainder
W (%): 14.0 ~ 16.0
Al (%): -
Al (%): -
Cu (%): -
Ti (%): -
Ti (%): -
Fe (% ): ≤ 3.0
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1005
Yield strength, σ0.2/MPa: 480
Elongation, δ ≥(％): 51.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBC: 33 ~ 43
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBC: 33 ~ 43
FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 300mm
Square bar / Flat bar: 3 ~ 350mm
Round bar (Diameter): 5.5 ~ 300mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 12mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 400mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 400mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
E-mail us: sales@ccsteels.com.
Hot search：L605
