AMS 6527
2025-01-16 17:21:00 Origin： Remark：0 Click：
Aerospace Alloy Steel AMS 6527 Specifications data sheet AMS 6527 Round bar, Wire rod, Plate (ESR refined), Hot forging / rolling, Heat treatment
TECHNICAL DATA SHEET - AMS 6527
MATERIAL CATEGORY - High Alloy Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 6527E
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (mass weight- %)
Carbon, C (％): 0.15 ~ 0.19
TECHNICAL SPECIFICATION - AMS 6527E
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (mass weight- %)
Carbon, C (％): 0.15 ~ 0.19
Manganese, Mn (％): ≤ 0.10
Silicon, Si (％): ≤ 0.10
Phosphorus, P (％) ≤: 0.008
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 1.80 ~ 2.20
Silicon, Si (％): ≤ 0.10
Phosphorus, P (％) ≤: 0.008
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 1.80 ~ 2.20
Nickel, Ni (%): 9.50 ~ 10.5
Molybdenum, Mo (％): 0.90 ~ 1.10
Molybdenum, Mo (％): 0.90 ~ 1.10
Cobalt, Co (%): 13.5 ~ 14.5
Titanium, Ti (％): ≤ 0.15
Aluminum, Al (％): ≤ 0.15
Nitrogen, N (%): ≤ 0.0015
Nitrogen, N (%): ≤ 0.0015
O (%): ≤ 0.0020
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: bars and forgings
Tensile strength, σb / MPa: 1620
Yield strength, σ0.2 / MPa: 1480
Form: bars and forgings
Tensile strength, σb / MPa: 1620
Yield strength, σ0.2 / MPa: 1480
Elongation, δ5 (％): 12.0
Reduction of area, ф (％): 60.0
Hardness + Annealed (HB): HRC50 (AT + aged)
MELTING PROCESS & APPLICATION
This alloy is generally smelt in VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 300mm
Square bar / Flat bar: 10mm to 500mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Reduction of area, ф (％): 60.0
Hardness + Annealed (HB): HRC50 (AT + aged)
MELTING PROCESS & APPLICATION
This alloy is generally smelt in VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 300mm
Square bar / Flat bar: 10mm to 500mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
