AMS 5552
2021-04-02 10:32:35 Origin： Remark：0 Click：
Aerospace AMS 5552 Specifications, Datasheet AMS 5552 Chemical, AMS 5552 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL STANDARD - AMS 5552
MATERIAL CATEGORY - High Alloy Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 5552G
HSN CODE - 72201100 / 72202020 / 72202030 / 72221100
TECHNICAL SPECIFICATION - AMS 5552G
HSN CODE - 72201100 / 72202020 / 72202030 / 72221100
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.10
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.10
Mn (％): ≤ 1.50
Si (％): ≤ 1.00
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 19.0 ~ 22.0
Si (％): ≤ 1.00
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 19.0 ~ 22.0
Ni (%): 30.0 ~ 34.0
Mo (％): -
Mo (％): -
Co (%): ≤ 1.00
Ti (％): 0.75 ~ 1.50
Al (％): -
Cu (%): ≤ 0.50
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: sheet, strip, plate and bars
Tensile strength, σb/MPa: 550 ~ 725
Yield strength, σ0.2/MPa: 205
Form: sheet, strip, plate and bars
Tensile strength, σb/MPa: 550 ~ 725
Yield strength, σ0.2/MPa: 205
Elongation, δ(％): 30.0
Reduction of area, ф(％): -
Hardness + solution annealed (HB): -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in BEF or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 350mm
Square bar / Flat bar: 10mm to 500mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Reduction of area, ф(％): -
Hardness + solution annealed (HB): -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in BEF or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 350mm
Square bar / Flat bar: 10mm to 500mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Previous page：Z18CWN 13
Last page：X3MnCrNiMoN20-13
