Gaman H
2021-04-12 08:45:09 Origin： Remark：0 Click：
Specifications Gaman H Datasheet, Gaman H Chemical, Gaman H Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATA SHEET - Grade Gaman H
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - SAE / UNS system exhaust valve Steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.47 ~ 0.57
Si (％): 2.30 ~ 3.00
Mn (％): 11.0 ~ 13.5
P (％) ≤: 0.030
S (％) ≤: 0.030
Cr (％): 20.5 ~ 22.0
Ni (％): -
Mo (％): -
Mn (％): 11.0 ~ 13.5
P (％) ≤: 0.030
S (％) ≤: 0.030
Cr (％): 20.5 ~ 22.0
Ni (％): -
Mo (％): -
N (%): 0.40 ~ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: solution treated
Tensile strength, σb/≥ MPa: 740
Yield strength, σ0.2/≥ MPa: 410
Elongation, δ ≥(％): 35.0
Elongation, δ ≥(％): 35.0
Reduction of area, ф ≥ (％): -
Hardness | HB: 265 max.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Previous page：EN54 / EN 54
Last page：Sil746
