AMS 5597
2021-09-16 14:30:21 Origin： Remark：0 Click：
Stocklist AMS 5597 Specifications, Suppliers AMS 5597 Inventory, Datasheet AMS 5597 Chemical from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL SPECIFICATION DATASHEET - Grade AMS 5597
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5597F
HS Code for Customs - 72221100 / 72221900 / 72223000
Techncial Specifications - AMS 5597F
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.20mm ~ 120mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions ( Mass Weight % )
Chemical compositions ( Mass Weight % )
C (％): ≤ 0.08
Mn (％): ≤ 0.35
Mn (％): ≤ 0.35
Si (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Ni (%): 50.0 ~ 55.0
Nb (%): 4.75 ~ 5.50
Mo (％): 2.80 ~ 3.30
Mo (％): 2.80 ~ 3.30
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
Co (%): ≤ 1.00
B (%): ≤ 0.006
Cu (%): ≤ 0.30
Fe (%): Remainder
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, strip and forgings
Form: Bars, plate, strip and forgings
Heat treatment condition: -
Tensile strength, σb/MPa: 965
Yield strength, σ0.2/MPa: 517
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 550mm
Square bar / Flat bar: 10mm to 600mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 550mm
Square bar / Flat bar: 10mm to 600mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Previous page：Inconel 721
Last page：EN 59
