AMS 5740
2024-09-16 08:23:40 Origin： Remark：0 Click：
Steel Round bar, Forgings AMS 5740 Rings, Corrosion and Heat resistant 14.5Cr - 6.5Ni - 0.72Ti Solution heat treated 1240MPa tensile strength
MATERIAL DATASHEET - AMS 5740
Material Category - Aerospace Material Steel Series
Stock available: Diam. 8 ~ 180mm
Techncial Specifications - AMS 5740E
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
TYPICAL CHEMICAL ELEMENTS (mass fraction in percent - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): ≤ 0.30
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％)≤: 0.025
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 14.0 ~ 15.0
Molybdenum, Mo (％): 1.00 ~ 1.50
Nickel, Ni (%): 6.00 ~ 7.00
Copper, Cu (％): -
Titanium, Ti (%): 0.55 ~ 0.90
Ferrum, Fe (%): Balance.
MECHANICAL PROPERTIES AT ROOM TEMP.
Condition: solution treated at 815 ℃.and then at 480°C for 2h in air
Tensile strength, Rm / MPa: 1240MPa
Yield strength, Rp 0.2 / MPa: 1205 MPa
Elongation, A (％): 10.0
Reduction of area, Z (％): 40.0
Hardness under heat treatment condition | HBW 352 ~ 432
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. This wire has been used typically for screening and stitching applications requiring good corrosion resistance and which may be subjected to elevated temperatures during fabrication or in service
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on. These products have been used typically for parts requiring both corrosion and oxidation resistance.
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. This wire has been used typically for screening and stitching applications requiring good corrosion resistance and which may be subjected to elevated temperatures during fabrication or in service
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on. These products have been used typically for parts requiring both corrosion and oxidation resistance.
PRODUCT PROFILES & DIMENSIONS
Round bar & Disc (diameter): 5.5 to 800mm
Wire rod (diameter): 1.0 ~ 12.5mm
Square bar / Flat bar (Thickness X Width): 10 to 600mm
Length: fixed length, random length, or based on the customer's special requirement.
Round bar & Disc (diameter): 5.5 to 800mm
Wire rod (diameter): 1.0 ~ 12.5mm
Square bar / Flat bar (Thickness X Width): 10 to 600mm
Length: fixed length, random length, or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you are interested in our products or services, or would like to learn more about us, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
Hot search：
Previous page：25CrMnNiTiA
Last page：0Cr17Ni12Mo2
