2.4631
2014-11-15 14:17:59 Origin： Remark：0 Click：
Specifications 2.4631 datasheet, 2.4631 Chemical, 2.4631 properties from steelmaking, hot forging, hot rolling, heat treatment, cold working. We also possess advanced precision machining equipments for further processing.
MATERIAL SPECIFICATIONS DATA SHEET - W-Nr 2.4631
MATERIAL CATEGORY: Nickel-chromium based superalloy
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
A nickel-chromium alloy similar to alloy 75 but made precipitation hardenable by additions of aluminium and titanium.
The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500ºF (815ºC).
Used for gas-turbine components (blades, rings, discs), bolts, tube supports in nuclear generators, exhaust valves in internal combustion engines.
MATERIAL SPECIFICATIONS - Alloy 80A, W-Nr. 2.4631, W-Nr. 2.4952, UNS N07080, BS 3076
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.10
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 18.0 ~ 21.0
Ni (％): Balance
Ti (％): 1.80 ~ 2.70
Al (％): 1.00 ~ 1.80
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 18.0 ~ 21.0
Ni (％): Balance
Ti (％): 1.80 ~ 2.70
Al (％): 1.00 ~ 1.80
Others (%): Co ≤2.00, Cu ≤0.20, Fe ≤3.00, B ≤0.008, Zr ≤0.15
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: heat treatment
Tensile strength, σb/MPa: 1250 Min.
Yield strength, σ0.2≥/MPa: 780
Elongation, δ5 ≥(％): -
Yield strength, σ0.2≥/MPa: 780
Elongation, δ5 ≥(％): -
Reduction of area, ψ≥(％): 30
Hardness≥: -
Hardness≥: -
HEAT TREATMENT PRACTICE
Annealing - it should be annealed at 1079°C for about 8 hours and air cooled.
Annealing - it should be annealed at 1079°C for about 8 hours and air cooled.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
AVAILABILITY
Round bar / flat bar / steel strip / square bar / valve body / ring / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Round bar / flat bar / steel strip / square bar / valve body / ring / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Gas turbine engineering
Automobile exhaust valves
Die-casting inserts and cores
Nuclear boiler tube parts.
Driveshafts
Gears
Fasteners
Landing and takeoff gear
Missile and ejector systems
Torsion springs
PRODUCT FORMS & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W50 - 1000mm X L1000 - 12000mm
Heavy/middle plate via hot rolled: T60 - 450mm X W50 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
Hot search：2.4631
