Nimonic 90
2014-11-15 14:51:32 Origin： Remark：0 Click：
Description Nimonic 90 is a Nickel-Chromium-Cobalt alloy. Round bar, flat bar, wire rod, and forgings Nimonic 90 Ex-stock hot forging, hot rolling, heat treatment
MATERIAL STANDARDS DATASHEET - Grade Nimonic 90
MATERIAL CATEGORY: Nickel-Chromium-Cobalt alloy
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
Wrought Ni-Cr alloy strengthened by the addition of Ti and Al. Age hardenable and creep-resistant alloy for service at temperatures to 920°C. Density 8.18 gm/cc, Melting point: 1370 °C
MATERIAL SPECIFICATIONS
Alloy 90, W-Nr. 2.4632
AMS 5829, ASTM B637
BS 3076, EN 2400, Udimet 90
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.13
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 18.0 ~ 21.0
Nickel, Ni (％): Balance
Titanium, Ti (％): 2.00 ~ 3.00
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 18.0 ~ 21.0
Nickel, Ni (％): Balance
Titanium, Ti (％): 2.00 ~ 3.00
Cobalt, Co (%): 15.0 ~ 21.0
Aluminum, Al (%): 1.00 ~ 2.00
Others (％): Cu ≤0.20, Fe ≤1.50, B ≤0.02, Zr ≤0.15
Others (％): Cu ≤0.20, Fe ≤1.50, B ≤0.02, Zr ≤0.15
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Condition: solution annealed
Tensile strength, σb/MPa: 800~1000
Yield strength, σ0.2≥/MPa: -
Elongation, δ5≥(％): -
Yield strength, σ0.2≥/MPa: -
Elongation, δ5≥(％): -
Reduction of area, ψ≥(％): -
Hardness≥: -
Hardness≥: -
Condition: solution annealed + aged
TS, σb/MPa: 1200
YS, σ0.2≥/MPa: 685
EL, δ5≥(％): 16.5
YS, σ0.2≥/MPa: 685
EL, δ5≥(％): 16.5
AZ, ψ≥(％): -
Hardness≥: -
Hardness≥: -
HEAT TREATMENT PRACTICE
Annealing - Age Harden at 750°C (1380°F) for 4 hours and air cool.
Annealing - Age Harden at 750°C (1380°F) for 4 hours and air cool.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Gas turbine engineering. Automobile exhaust valves. Die-casting inserts and cores.
Nuclear boiler tube parts. Driveshafts and Gears. Fasteners.
Landing and takeoff gear. Missile and ejector systems. Torsion springs.
PROFILE AND DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W70 - 1000mm X L1000-12000mm
Heavy/middle plate via hot rolled: T60 - 400mm X W70 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
