1.2101 Stockist, 1.2101 Equivalent Steel
Home > Tool steel > Text

1.2101
2014-09-16 20:14:36   Origin:   Remark:0 Click:

ISO 4597 Technical specifications Cold work Tool steel 1.2101 Round bar, Flat bar, 62SiMnCr4 plate Stock Available, Heat treatment
DIN 62SiMnCr4 & W-Nr 1.2101 - DATA SHEET
Material category: Cold work alloy tool steel 
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements, and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools, Mechanical parts, Air hammer tools, Piercing tools.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the softened condition.
Final heat treatment - Quenched and tempered. 
MATERIAL SPECIFICATIONS - EN ISO 4957: 2000 , DIN 17350 (1980)
CHEMICAL COMPOSITION (mass weight - %)  
Carbon, C (%): 0.58 ~ 0.66
Silicon, Si (%): 0.90 ~ 1.20
Manganese, Mn (%): 0.90 ~ 1.20
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 0.40 ~ 0.70
Molybdenum, Mo (%): -
Vanadium, V (%): -
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working tenperature /℃:  1050~850
Annealing temperature /℃:  710~750
Hardness after annealing ≤HBW:  225
Quenching temperature /℃:  830~860
Cooling medium: water / oil
Common tempering temperature /℃:  240~350
Hardness after tempering at temperature HRC|100℃:    61
Hardness after tempering at temperature HRC|200℃:    59
Hardness after tempering at temperature HRC|300℃:    56
Hardness after tempering at temperature HRC|400℃:    50
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers. E-mail: sales@ccsteels.com
PROFILE & DIMENSIONS  
Round bar / Disc (diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 600mm
Plate / Sheet steel / Steel strip: 0.5mm to 500mm
Width: 8mm to 00mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shaft, and other different shapes based on OEM.

Hot search:1.2101

Previous page:62SiMnCr4
Last page:58SiCr8

Share to: