40CrMnMo8
2016-02-01 10:11:10 Origin： Remark：0 Click：
Specifications 40CrMnMo8 Datasheet, Inventory 40CrMnMo8 Chemical, Suppliers 40CMD8 Property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification - NF A35-590 1992. We also possess the advanced precision machining equipments for catering for your different special requirements.
Technical Data Sheet - Grade 40CrMnMo8
OFFICIAL TEST REPORT: issued by TUV - SGS - BV
MATERIAL CATEGORY - Cold work alloy tool steel
MATERIAL SPECIFICATIONS - NF A35-590 1992
CHEMICAL COMPOSITION (WEIGHT - %)
C (％): 0.35 ~ 0.45
Si (％): 0.15 ~ 0.40
Mn (％): 1.35 ~ 1.65
P (％)≤: 0.030
S (％)≤: 0.030
Cr (%): 1.75 ~ 2.15
Mo (％): 0.15 ~ 0.30
Ni (%): -
V (%): -
HEAT TREATMENT PRACTICE AND HARDNESS
Hardness after annealing ≤HBW: 300
Quenching temperature ℃: -
Cooling medium: -
Hardness after annealing ≤HBW: 300
Quenching temperature ℃: -
Cooling medium: -
Tempering temperature ℃: -
Hardness value after tempered /≥ HRC: -
MELTING PROCESS
This alloy is generally smelt in electric arc furnace (EAF ) or IFF + VD, LF + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining.
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutlery for medical equipments
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
HEAT TREATTMENT PRACTICE
The preheating of measuring and cutting tool steel is spheroidizing annealing, final heat treatment is quenching + low temperature tempering and hardness after heat treatment can reach 60~65HRC. When heat treat tool steel grades consideration should be given to hardening temperature, including ratio of heating, cooling and soaking times which will differ due to factors such as the shape and size of each chemical component. Other considerations during heat treatment include the type of furnace, quenching medium and work piece transfer facilities.
FEATURES AND CLASSIFICATIONS
Hot-work die divides into several main types, such as hammer forging, die forging, extrusion and die casting, including hot forging die, press machine forging die, stamping die, hot-extrusion die, metal die-casting mould. Heat distortion mould not only supports huge mechanical stress, but also thermal stress during working repeatedly. Hot-work die steel should have not only high hardness, red hardness, abrasion resistance, toughness, but also have excellent high temperature strength, thermal fatigue stability, thermal conductivity, upper hardenability for guaranteeing the whole cross section with consistent mechanical property.
PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 610mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 1000mm X Coil
Heavy/middle plate via hot rolled: T40 - 500mm X W70 - 1000mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
This alloy is generally smelt in electric arc furnace (EAF ) or IFF + VD, LF + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining.
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutlery for medical equipments
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
HEAT TREATTMENT PRACTICE
The preheating of measuring and cutting tool steel is spheroidizing annealing, final heat treatment is quenching + low temperature tempering and hardness after heat treatment can reach 60~65HRC. When heat treat tool steel grades consideration should be given to hardening temperature, including ratio of heating, cooling and soaking times which will differ due to factors such as the shape and size of each chemical component. Other considerations during heat treatment include the type of furnace, quenching medium and work piece transfer facilities.
FEATURES AND CLASSIFICATIONS
Hot-work die divides into several main types, such as hammer forging, die forging, extrusion and die casting, including hot forging die, press machine forging die, stamping die, hot-extrusion die, metal die-casting mould. Heat distortion mould not only supports huge mechanical stress, but also thermal stress during working repeatedly. Hot-work die steel should have not only high hardness, red hardness, abrasion resistance, toughness, but also have excellent high temperature strength, thermal fatigue stability, thermal conductivity, upper hardenability for guaranteeing the whole cross section with consistent mechanical property.
PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 610mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 1000mm X Coil
Heavy/middle plate via hot rolled: T40 - 500mm X W70 - 1000mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry or help, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：40CrMnMo8
Previous page：35CrMnMo7 /35CMD7
Last page：13CrMoV9-10
