1.2353
2014-09-27 11:06:55 Origin： Remark：0 Click：
Tool steel DIN 1.2353 Ex-stock,1.2353 Chemical, 1.2353 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening,100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification - ISO 4957 1999. We also possess the advanced precision machining equipments for catering for your different special requirements.
DIN 27CrMoV6-12 & W-Nr 1.2353 - DATA SHEET
MATERIAL CATEGORY: Cold work alloy tool steel
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
PRODUCT DESCRIPTION
The alloy is usually produced by EAF /VD /LF /IFF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the
buyers' requirements.
Bars are usually supplied bright (peeling or centreless grinding) in the softened condition.
Final heat treatment - heat treatment / QT
MATERIAL SPECIFICATIONS
EN ISO 4957: 2000 , DIN 17350 (1980)
AVAILABLE SHAPES
Black bar /Flat bar /Square bar
Bright - peeled + polishing /centerless grinding / peeled + slidabrading
Forged - ring /tube /pipe casing /discs /shaft
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.24 ~ 0.30
Si(％): 0.40 ~ 0.60
Mn(％): 0.30 ~ 0.70
P(％)≤: 0.030
S(％)≤: 0.030
Cr(％): 1.30 ~ 1.50
Mo(％): 1.10 ~ 1.40
V(％): 0.35 ~ 0.45
Si(％): 0.40 ~ 0.60
Mn(％): 0.30 ~ 0.70
P(％)≤: 0.030
S(％)≤: 0.030
Cr(％): 1.30 ~ 1.50
Mo(％): 1.10 ~ 1.40
V(％): 0.35 ~ 0.45
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working tenperature /℃: 1100～850
Annealing temperature /℃: 740～770
Hardness after annealing ≤HBW: 223
Annealing temperature /℃: 740～770
Hardness after annealing ≤HBW: 223
Quenching temperature /℃: 950～980
Cooling medium: water
Common tempering temperature /℃: 550~700
Hardness after tempering at temperature HRC|100℃: --
Hardness after tempering at temperature HRC|200℃: --
Hardness after tempering at temperature HRC|300℃: --
Hardness after tempering at temperature HRC|400℃: --
Cooling medium: water
Common tempering temperature /℃: 550~700
Hardness after tempering at temperature HRC|100℃: --
Hardness after tempering at temperature HRC|200℃: --
Hardness after tempering at temperature HRC|300℃: --
Hardness after tempering at temperature HRC|400℃: --
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 600mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 2500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Hot search：1.2353
Previous page：27CrMoV6-12
Last page：N08020
