AIR 9160C 45SCD6
2017-02-16 10:38:12 Origin： Remark：0 Click：
Material standard specification of AIR 9160/ C Grade 45SCD6 Round bar, Flat bar, Steel Strip, ESR melted, 45SCD6 Hot forging, Hot rolling, Heat treatment
TECHNICAL SPECIFICATION - AIR 9160C Grade 45SCD6
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
Silicon, Si (％): 1.30 ~ 1.70
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (%): 0.50 ~ 0.75
Molybdenum, Mo (%): 0.15 ~ 0.35
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 1600 ~ 1800
Yield strength, σ0.2/≥ MPa: 1450
Elongation, δ ≥(％): 6.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed / Heat treated hardness | HB: -
Tensile strength,σb/≥ MPa: 1600 ~ 1800
Yield strength, σ0.2/≥ MPa: 1450
Elongation, δ ≥(％): 6.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed / Heat treated hardness | HB: -
Quenching/Solution treated, 890,+/-10 Deg, tempering 425, +/-5 Deg.
FROFILE & DIMENSIONS
Round bar (Diameter): 1.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 200mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
FROFILE & DIMENSIONS
Round bar (Diameter): 1.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 200mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：ASTM 1522H
Last page：Z12CN18-10
